OBSERVE THE CONTACT · CHECK THE FIXING · ADJUST WITH PURPOSE

Door & Cabinet Fit Finder

Choose a rubbing door, uneven cabinet front or sticking drawer to get focused checks, an adjustment route and useful supplies. The result follows the item, symptom, fixing material and conditions you select.

Free and automatic. No person reviews your choices. This tool cannot identify hidden damage, certify an assembly or replace the actual hardware instructions.

How to use this fit finder
  1. Select the item and the problem you can observe.
  2. Choose whether the accessible fixing holds, what material it enters and when the problem happens. “Not sure” is a valid choice.
  3. Mark any damaged material or special assembly. Only confirm silicone lubrication when the instructions for those parts allow it.
  4. Optionally record gaps at your own reference points, then build the fit-check route.
Conditions that change the route
Record gap measurements — optional

Record top, left, right or bottom gaps at consistent reference points, as viewed from the same side. These entries are notes, not target clearances or a pass/fail test.

Frequently asked questions

Will this tell me exactly which screw to turn?

It identifies the type of check or adjustment to look for. Screw functions, directions and ranges vary by hardware. Use the actual instructions rather than copying an adjustment from a different hinge or runner.

Why check screws before adjusting the gap?

An adjustment assumes its fixing remains sound. A loose or stripped connection can let the item move independently, so changing an adjuster may not address the problem.

Can I use a cabinet repair plate on a room door?

The linked plates are cabinet-hinge options with dimensions and mounting requirements to check. They are not generic repairs for room-door hinges, failed frames or damaged drawer fronts.

Should I spray lubricant on every squeaking hinge or slide?

No. Use the care method for the identified system. Some mechanisms need no added lubricant. Silicone options appear only when you confirm that the instructions permit them on the actual parts and materials.

Does the gap log tell me what clearance is safe?

No. It records your measurements without assigning a target or pass/fail result. Required clearances depend on the actual assembly, movement and any rated function.

Why do some results show inspection tools?

Unknown fixings, seasonal variation or damaged material may need another check before a repair part can be chosen. The tool keeps useful observation supplies and related guides available for those ordinary cases.

Can this check a fire door, heavy glass leaf or powered mechanism?

No. Selecting a special or unsafe assembly pauses the adjustment route. Use the appropriate service and instructions for its function.

Is this an inspection or personal consultation?

No. It is a free automatic tool. No person reviews your choices, and the result is not a diagnosis or approval to modify the assembly.